LT-4-120 - 4-Light Timer (120V): G
The LT-4-120 (also available as LT4-240) provides four 10 amp 120 volt outlet receptacles, each capable of powering up to 1000 watts of lighting equipment. Green Air was the first company in our industry to introduce timers capable of handling four to eight 1000W lighting systems at a time without blowing circuit breakers. Since then, many companies have tried to copy these timers, but the LT-Series timers are still the best. These time switches are designed to operate high load lighting equipment. They consist of a premium quality precision synchronous clock motor and a high amperage switching circuit. All Green Air Products controllers are housed in black anodized brush finish aluminum enclosures which can not break, chip or corrode. Operates with a maximum combined outlet switching capacity of 40 amps (make sure you plug these timers into a 40 amp circuit if you want to operate them at full capacity). Plug or wire the power cord into a receptacle capable of handling the maximum total combined amperage draw of your equipment load (plug not included; obtain at any local hardware store if not hardwiring). Make certain that the receptacle, wiring and circuit breaker are adequate and properly suited for this application. Plug lighting equipment into outlet receptacles located on each side of controller. Turn clock dial to current time of day. AM and PM is indicated by colored ring on dial face. Push all trippers toward the center of the dial for ''On'' time and leave in the outward position for ''Off'' period. Timer has 96 non-detachable 15 minute on\off trippers.