4xem Corp. IPVS4 NETWORK VIDEO SERVER
The IPVS4 Quad Channel MJPEG Server connects four analog CCTV video camera to an IP network allowing either an upgrade of an existing analog camera CCTV Video System to gain the benefits of an IP Network Video System, or by including existing analog CCTV cameras in an expanded IP Network Video System. MODEL: IPVS4 VENDOR: 4XEM CORP
FEATURES: IPVS4 Four Channel MJPEG IP Network Video Server
4XEM's IPVS4 Quad Channel MJPEG IP Network Video Server connects
four analog CCTV video camera to an IP network. It protects your
investment in CCTV Video by allowing you to either upgrade your
existing analog camera CCTV Video System to gain the benefits of an
IP Network Video System, or by including existing analog CCTV
cameras in an expanded IP Network Video System.
High performance and fully configurable MJPEG compression engine
PPP dial-in and dial-out via external modem
Remote P/T/Z camera control
Flexible integration interface
4 analog camera input, 4 analog video outputs
Video stream 30/25 frames/sec for single input, 6 frames/sec for Quad
TCP/IP network remote video surveillance system.
Built-in web server
In-image motion detection
SPECIFICATIONS:
ALARM FEATURES:
Motion Detection with Percentage and Sensitivity : Yes
Daily Repeat Timing Schedule : Yes
3 Color Images per Camera for Pre/Post Alarm : Yes
Automatic Transfer of Stored Images via Email or FTP: Yes
AUDIO - Frequency : 24 kbps
CONNECTIVITY - Video Input : 4 analog video inputs
Video Output : 4 loop-through outputs
GENERAL I/O - Sensor Inputs : 4 sensor inputs max. 12V DC 50mA
Relay Outputs : 2 relay outputs max. 24V DC 1A/125V AC 0.5A
MISCELLANEOUS- Development Kit: Open ActiveX control
LED Indicators : System power and status indicators, Network
link and speed indicators.
NETWORKING - Ethernet : 10baseT or 100baseT Fast Ethernet auto
negotiation.
Protocol : TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS
and DHCP.
Modem : PPP (dial-up, direct-cable connection)
PAN/TILT/ZOOM- Multiple PTZ Camera Control
Through RS232 or RS485: Yes
CGI Command Serial Driver : Supported
Supported Devices and
Protocols : Sony VISCA, Canon VC-C1, VC-C3,
VC-C4, Dynacolor DynaDome,
Pelco D, LiLin, Ernitec.
SECURITY - Administrator and User Group Protection : Yes
Password Authentication : Yes
Demo Account with Limitation by Administrator: Yes
SYSTEM MEMORY- RAM: 16MB SDRAM
ROM: 2MB FLASH ROM
SYSTEM CPU - Trimedia PNX1300
VIDEO SPECS - NTSC Resolution @ 176 x 112: Up to 30 frames
NTSC Resolution @ 352 x 288: Up to 30 frames
NTSC Resolution @ 704 x 480: Up to 9 frames
PAL Resolution @ 176 x 144: Up to 25 frames
PAL Resolution @ 352 x 288: Up to 25 frames
PAL Resolution